scroll down
Screw Punching Testing Machine PTH-120、 PTH-120RS
Screw Punching Testing Machine PTH-120、 PTH-120RS

Manual Screw Penetration Tester

  1. Equipped with three chrome-plated steel shafts and linear bearings for high wear resistance, low friction, and improved testing stability.

  2. During testing, the lifting gear is fully released to prevent additional resistance or load variation that may affect test results.

  3. Two-speed gear shifting mechanism (high / low) eliminates the need to replace the electric drill for different testing requirements.

  4. Large LCD display provides clear readings and an elegant appearance, with built-in data memory function.

  5. Optional RS-232 interface allows connection with a computer for data transfer and easier report generation.

  6. Optional micro printer available to prevent manual recording errors.


ModelPTH-120PTH-120RS
Rotation SpeedLow Speed : 1600 ~ 1800 RPM
High Speed : 2200 ~ 2500 RPM
Applicable Size#6 - No.1 ~ No.3 / #12 - No.1 ~ No.3
Testing Length120 mm (MAX)
Standard Load7 kg ± 0.3 kg
Maximum TorqueLow Speed : 90 kg-cm ±2% (MAX)
PowerAC 110 V / 60 Hz / Single Phase
(Other voltage specifications can be customized)
Machine DimensionsD 380 × W 280 × H 560 mm
Net Weight42 kg
AccessoriesHex Wrench : 1 pc (5 mm)
Test Plate : 5 pcs (1.0 mm)
Magnetic Bit Holder : 1 pc (5/16″)
Weights : 2 kg × 13 pcs / 1 kg × 1 pc / 0.5 kg × 1 pc
Phillips Screwdriver Bits : No.1 × 1 pc / No.2 × 1 pc / No.3 × 1 pc
OptionalXRS-232 Computer Connection Software (RS)